# Getting Started

**URL:** https://3dclub.orbbec3d.com/c/developer-resources/getting-started/5.md

[Latest](https://3dclub.orbbec3d.com/latest.md) · [Categories](https://3dclub.orbbec3d.com/categories.md) · [Tags](https://3dclub.orbbec3d.com/tags.md)

---

## [About the getting started category](https://3dclub.orbbec3d.com/t/about-the-getting-started-category/21)

<div class="topic-metadata">

**Author:** [@james\_ashley](https://3dclub.orbbec3d.com/u/james_ashley)\
**Replies:** 0

</div>

This is where we’ll be adding information to get you up and running as quickly as possible with tutorials and walkthroughs. Want to do something you’ve seen online but not sure how to get started? Then this is the place …

---

## [Astra 2, 3D scan, indoor room, realtime](https://3dclub.orbbec3d.com/t/astra-2-3d-scan-indoor-room-realtime/4490)

<div class="topic-metadata">

**Author:** [@v11](https://3dclub.orbbec3d.com/u/v11)\
**Replies:** 0\
**Last updated:** [August 8, 2025, 8:31am UTC](https://3dclub.orbbec3d.com/t/astra-2-3d-scan-indoor-room-realtime/4490 "2025-08-08T08:31:34Z")

</div>

Hi everyone, I just receive my Astra 2 and I want to scan an underground space for art project. I run with a MacbookPro M4 Max, 128Go RAM, 15.5 Sequoia. I made a standalone, mobile, caméra, with light and screen contro…

---

## [Regarding the heat generation of the Femto Bolt](https://3dclub.orbbec3d.com/t/regarding-the-heat-generation-of-the-femto-bolt/4423)

<div class="topic-metadata">

**Author:** [@LDK](https://3dclub.orbbec3d.com/u/LDK)\
**Replies:** 1\
**Last updated:** [May 19, 2025, 3:59pm UTC](https://3dclub.orbbec3d.com/t/regarding-the-heat-generation-of-the-femto-bolt/4423 "2025-05-19T15:59:26Z")

</div>

Hello, I am a user of the Femto Bolt. I was wondering if there is a way to check the device temperature of the Femto Bolt?"

---

## [Recording Synchronized RGB and Depth Streams with Orbbec Femto Bolt](https://3dclub.orbbec3d.com/t/recording-synchronized-rgb-and-depth-streams-with-orbbec-femto-bolt/4371)

<div class="topic-metadata">

**Author:** [@saiddao](https://3dclub.orbbec3d.com/u/saiddao)\
**Replies:** 0\
**Last updated:** [February 4, 2025, 11:30am UTC](https://3dclub.orbbec3d.com/t/recording-synchronized-rgb-and-depth-streams-with-orbbec-femto-bolt/4371 "2025-02-04T11:30:36Z")

</div>

Hi, I’m a newcomer, and I am using two Femto Bolt. I need to record the RGB and Depth streams in sync. I am following the following instructions for the sync: I prefer to use a dedicated PC per Femto Bolt. My questi…

---

## [Depth and IR image not available](https://3dclub.orbbec3d.com/t/depth-and-ir-image-not-available/4264)

<div class="topic-metadata">

**Author:** [@vidar.solli](https://3dclub.orbbec3d.com/u/vidar.solli)\
**Replies:** 3\
**Last updated:** [October 14, 2024, 6:33pm UTC](https://3dclub.orbbec3d.com/t/depth-and-ir-image-not-available/4264 "2024-10-14T18:33:37Z")

</div>

I am running Ubuntu 22.04. I have installed Orbbec SDk according to the instruction without any errors. I have also installed OpenGL and added the environment variable LD\_LIBRARY\_PATH to point at the . . . pyorbbecsdk/sd…

---

## [OS Access violation error with python and OpenNI](https://3dclub.orbbec3d.com/t/os-access-violation-error-with-python-and-openni/4169)

<div class="topic-metadata">

**Author:** [@xaphrdx](https://3dclub.orbbec3d.com/u/xaphrdx)\
**Replies:** 0\
**Last updated:** [July 12, 2024, 11:34am UTC](https://3dclub.orbbec3d.com/t/os-access-violation-error-with-python-and-openni/4169 "2024-07-12T11:34:20Z")

</div>

Hello, I am trying to get the feed of an Astra Orbbec Pro Plus camera through python using the following code. import cv2 import numpy as np from primesense import openni2 from primesense import \_openni2 as c\_api open…

---

## [Record synced depth+color with Orbbec Viewer](https://3dclub.orbbec3d.com/t/record-synced-depth-color-with-orbbec-viewer/4042)

<div class="topic-metadata">

**Author:** [@jenna\_dzitsiuk123](https://3dclub.orbbec3d.com/u/jenna_dzitsiuk123)\
**Replies:** 1\
**Last updated:** [May 7, 2024, 11:59pm UTC](https://3dclub.orbbec3d.com/t/record-synced-depth-color-with-orbbec-viewer/4042 "2024-05-07T23:59:49Z")

</div>

I’m using Orbbec Viewer to record data from Gemini 2L. My goal is to get aligned depth and color images (same image space) and each image should be synced in time. I get color and depth aligned with d2D(HW) option. But …

---

## [Does Orbbec SDK support ARM CPU?](https://3dclub.orbbec3d.com/t/does-orbbec-sdk-support-arm-cpu/3932)

<div class="topic-metadata">

**Author:** [@runny](https://3dclub.orbbec3d.com/u/runny)\
**Replies:** 2\
**Last updated:** [January 3, 2024, 8:58pm UTC](https://3dclub.orbbec3d.com/t/does-orbbec-sdk-support-arm-cpu/3932 "2024-01-03T20:58:16Z")

</div>

Does Orbbec SDK support ARM CPU like the one in PI 5?

---

## [EmguCV and AstraSDK for object dectection](https://3dclub.orbbec3d.com/t/emgucv-and-astrasdk-for-object-dectection/1737)

<div class="topic-metadata">

**Author:** [@CKL](https://3dclub.orbbec3d.com/u/CKL)\
**Replies:** 6\
**Last updated:** [December 13, 2023, 4:15pm UTC](https://3dclub.orbbec3d.com/t/emgucv-and-astrasdk-for-object-dectection/1737 "2023-12-13T16:15:55Z")

</div>

Hi everyone, Newbie here. I’m an engineer from Germany and currently building a concept for object detection and measurement. The objects lengths, widths and heights should be then sent to the robot. So using BlobTrack…

---

## [Using Orbbec Viewer for Gemini 2](https://3dclub.orbbec3d.com/t/using-orbbec-viewer-for-gemini-2/3732)

<div class="topic-metadata">

**Author:** [@Dhruv\_GA](https://3dclub.orbbec3d.com/u/Dhruv_GA)\
**Replies:** 4\
**Last updated:** [December 6, 2023, 6:57pm UTC](https://3dclub.orbbec3d.com/t/using-orbbec-viewer-for-gemini-2/3732 "2023-12-06T18:57:03Z")

</div>

I am trying to use the Orbbec viewer for my Gemini 2 camera. the application is able to read the device but it is not getting connected to the device. Here is the log for the same: #11 \[DEBUG\] device added:Orbbec Gemin…

---

## [Astra camera - usage](https://3dclub.orbbec3d.com/t/astra-camera-usage/3848)

<div class="topic-metadata">

**Author:** [@pragathi123](https://3dclub.orbbec3d.com/u/pragathi123)\
**Replies:** 1\
**Last updated:** [November 10, 2023, 2:37pm UTC](https://3dclub.orbbec3d.com/t/astra-camera-usage/3848 "2023-11-10T14:37:40Z")

</div>

We are getting started to work with Orbbec astra camera. in the website, it is showing that the astra series is compatible with openni sdk only. is it compatible with other sdks like astra sdk and orbbec sdk? How …

---

## [如何排除" Failed to open device: 2bc5/0402@1/3 error: Could not open "2bc5/0402@1/3": Xiron OS failed to create a mutex!"](https://3dclub.orbbec3d.com/t/failed-to-open-device-2bc5-0402-1-3-error-could-not-open-2bc5-0402-1-3-xiron-os-failed-to-create-a-mutex/3840)

<div class="topic-metadata">

**Author:** [@RexK](https://3dclub.orbbec3d.com/u/RexK)\
**Replies:** 0\
**Last updated:** [October 31, 2023, 7:53am UTC](https://3dclub.orbbec3d.com/t/failed-to-open-device-2bc5-0402-1-3-error-could-not-open-2bc5-0402-1-3-xiron-os-failed-to-create-a-mutex/3840 "2023-10-31T07:53:30Z")

</div>

調用"ros2 launch astra\_camera astra\_mini.launch.py" 出現: " " 請問有任何排除方法嗎?

---

## [Errors with Astra S](https://3dclub.orbbec3d.com/t/errors-with-astra-s/3830)

<div class="topic-metadata">

**Author:** [@miksadikov](https://3dclub.orbbec3d.com/u/miksadikov)\
**Replies:** 1\
**Last updated:** [October 30, 2023, 1:12pm UTC](https://3dclub.orbbec3d.com/t/errors-with-astra-s/3830 "2023-10-30T13:12:59Z")

</div>

I bought an Astra S camera. Its specification states the following - Data Output: Point Cloud, Depth Map, IR or RGB. I installed the OrbbecSDK and am following the instructions from README. When I try to launch test ap…

---

## [Can't view images](https://3dclub.orbbec3d.com/t/cant-view-images/3809)

<div class="topic-metadata">

**Author:** [@meirohad](https://3dclub.orbbec3d.com/u/meirohad)\
**Replies:** 1\
**Last updated:** [October 19, 2023, 3:27pm UTC](https://3dclub.orbbec3d.com/t/cant-view-images/3809 "2023-10-19T15:27:13Z")

</div>

Hello, I acquired a new Gemini 2 L camera. I downloaded the SDK and documentation and am running the viewer to test the camera but cannot get frames. I am running on Win 11 (build 22621) and installed OpenCV as shown i…

---

## [The camera doesn't connect.](https://3dclub.orbbec3d.com/t/the-camera-doesnt-connect/3821)

<div class="topic-metadata">

**Author:** [@ohsh111](https://3dclub.orbbec3d.com/u/ohsh111)\
**Replies:** 1\
**Last updated:** [October 19, 2023, 3:12pm UTC](https://3dclub.orbbec3d.com/t/the-camera-doesnt-connect/3821 "2023-10-19T15:12:07Z")

</div>

You are about to run Astra+ in a Windows environment. Only RGB cameras are connected in the instrument manager. Depth camera, ir camera is not connected. It is connected to the USB 3.0 port. What should I do? (uploa…

---

## [Femto Bolt not found](https://3dclub.orbbec3d.com/t/femto-bolt-not-found/3803)

<div class="topic-metadata">

**Author:** [@pplantard35](https://3dclub.orbbec3d.com/u/pplantard35)\
**Replies:** 8\
**Last updated:** [October 19, 2023, 2:50pm UTC](https://3dclub.orbbec3d.com/t/femto-bolt-not-found/3803 "2023-10-19T14:50:39Z")

</div>

Hello, We’ve just received the new Femto Bolt camera. We wanted to test it on the samples provided by Orbbec in OrbbecSDK\_1.0.10\_Release\_Kinect and OrbbecViewer\_1.7.5\_Windows, but the camera could not be found for all …

---

## [Astra+ Pro not working](https://3dclub.orbbec3d.com/t/astra-pro-not-working/3619)

<div class="topic-metadata">

**Author:** [@Fred](https://3dclub.orbbec3d.com/u/Fred)\
**Replies:** 2\
**Last updated:** [September 25, 2023, 11:12am UTC](https://3dclub.orbbec3d.com/t/astra-pro-not-working/3619 "2023-09-25T11:12:20Z")

</div>

Hello, I have issues to make the Orbbec Astra+ Pro working under windows 10. The Color camera is working perfectly, but not the depth camera. The OrbbecViwer does not accept tu run it. I can see the camera un the device…

---

## [Femto Mega, point cloud coordinate are inf and -inf](https://3dclub.orbbec3d.com/t/femto-mega-point-cloud-coordinate-are-inf-and-inf/3781)

<div class="topic-metadata">

**Author:** [@RaiSte](https://3dclub.orbbec3d.com/u/RaiSte)\
**Replies:** 0\
**Last updated:** [September 22, 2023, 2:13pm UTC](https://3dclub.orbbec3d.com/t/femto-mega-point-cloud-coordinate-are-inf-and-inf/3781 "2023-09-22T14:13:39Z")

</div>

Hello everyone, I’m executing the example “PointCloud” with the camera connected by Ethernet but the points coordinates take two values combination: (0,0,0) or (inf, -inf, z value). I want to show the correct 3D world …

---

## [Issue to get both left and right IR camera from Gemini 2L](https://3dclub.orbbec3d.com/t/issue-to-get-both-left-and-right-ir-camera-from-gemini-2l/3760)

<div class="topic-metadata">

**Author:** [@jeffrrrrrr](https://3dclub.orbbec3d.com/u/jeffrrrrrr)\
**Replies:** 0\
**Last updated:** [September 13, 2023, 9:19am UTC](https://3dclub.orbbec3d.com/t/issue-to-get-both-left-and-right-ir-camera-from-gemini-2l/3760 "2023-09-13T09:19:20Z")

</div>

From the ros node for Gemini 2L camera, I would be able to get the IR image from ros launch. However I checked the source code and trying to get both left and right IR images by editing this line const std::vector\<strea…

---

## [ModuleNotFoundError: No module named 'pyorbbecsdk'](https://3dclub.orbbec3d.com/t/modulenotfounderror-no-module-named-pyorbbecsdk/3733)

<div class="topic-metadata">

**Author:** [@Dhruv\_GA](https://3dclub.orbbec3d.com/u/Dhruv_GA)\
**Replies:** 2\
**Last updated:** [August 31, 2023, 6:01am UTC](https://3dclub.orbbec3d.com/t/modulenotfounderror-no-module-named-pyorbbecsdk/3733 "2023-08-31T06:01:56Z")

</div>

I tried using the pyorbbecsdk starting by first cloning this: git clone https://github.com/OrbbecDeveloper/pyorbbecsdk.git then I followed the readme.md file in the repository. Here is what I did after cloning the above…

---

## [Femto - setIntProperty() not working and wrong frame rate](https://3dclub.orbbec3d.com/t/femto-setintproperty-not-working-and-wrong-frame-rate/3728)

<div class="topic-metadata">

**Author:** [@ralucadianasambra](https://3dclub.orbbec3d.com/u/ralucadianasambra)\
**Replies:** 0\
**Last updated:** [August 14, 2023, 8:37am UTC](https://3dclub.orbbec3d.com/t/femto-setintproperty-not-working-and-wrong-frame-rate/3728 "2023-08-14T08:37:55Z")

</div>

Hi, I run 2 Femto sensors in sync mode. I set the exposure, then I get the desired profile and finally start the profile. Most of the time, everything works as intented. However, sometimes, the second sensor remains in …

---

## [Astra S not recognized when running the progrmas from the SDK](https://3dclub.orbbec3d.com/t/astra-s-not-recognized-when-running-the-progrmas-from-the-sdk/3626)

<div class="topic-metadata">

**Author:** [@mosin40](https://3dclub.orbbec3d.com/u/mosin40)\
**Replies:** 1\
**Last updated:** [March 31, 2023, 1:43am UTC](https://3dclub.orbbec3d.com/t/astra-s-not-recognized-when-running-the-progrmas-from-the-sdk/3626 "2023-03-31T01:43:38Z")

</div>

Hi, I recently got an Astra S that will be used for a uni project. So i installed the drivers that came with sdk package and then tried to run the executables after restarting pc from the example folder to try to see if…

---

## [Persee+ - missing instruction and drivers](https://3dclub.orbbec3d.com/t/persee-missing-instruction-and-drivers/3551)

<div class="topic-metadata">

**Author:** [@damianjakubiuk](https://3dclub.orbbec3d.com/u/damianjakubiuk)\
**Replies:** 4\
**Last updated:** [October 28, 2022, 3:18pm UTC](https://3dclub.orbbec3d.com/t/persee-missing-instruction-and-drivers/3551 "2022-10-28T15:18:37Z")

</div>

I see no one responding here but i will give a try. My hardware: persee+ (android) computer on windows 11 I can’t explore device storage and upload .apk. Device is not showing in explorer and not even in device manage…

---

## [Body Tracking SDK and license for latest Orbbec SDK](https://3dclub.orbbec3d.com/t/body-tracking-sdk-and-license-for-latest-orbbec-sdk/3475)

<div class="topic-metadata">

**Author:** [@david1](https://3dclub.orbbec3d.com/u/david1)\
**Replies:** 4\
**Last updated:** [September 9, 2022, 8:35pm UTC](https://3dclub.orbbec3d.com/t/body-tracking-sdk-and-license-for-latest-orbbec-sdk/3475 "2022-09-09T20:35:38Z")

</div>

Hello, I would like to know whether or not the Body Tracking function is available in latest Orbbec SDK (v1.2). I know the body tracking is available from Arstra SDK (v2.1.3). And there is a document showing how to app…

---

## [Astra Stereo S not working](https://3dclub.orbbec3d.com/t/astra-stereo-s-not-working/3522)

<div class="topic-metadata">

**Author:** [@amrOrbbec](https://3dclub.orbbec3d.com/u/amrOrbbec)\
**Replies:** 3\
**Last updated:** [August 7, 2022, 9:16am UTC](https://3dclub.orbbec3d.com/t/astra-stereo-s-not-working/3522 "2022-08-07T09:16:02Z")

</div>

I have the Orbbec Astra Stereo S USB 3.0 depth sensor, and I cannot make it work with the Orbbec viewer. I am running Windows 11. The depth sensor is connected and recognized by the PC with the correct drivers. I have i…

---

## [Doesn't appear Orbbec Persee+ in device manager](https://3dclub.orbbec3d.com/t/doesnt-appear-orbbec-persee-in-device-manager/3488)

<div class="topic-metadata">

**Author:** [@itakumi](https://3dclub.orbbec3d.com/u/itakumi)\
**Replies:** 0\
**Last updated:** [June 16, 2022, 1:58am UTC](https://3dclub.orbbec3d.com/t/doesnt-appear-orbbec-persee-in-device-manager/3488 "2022-06-16T01:58:32Z")

</div>

I would like to ask you about installing Ubuntu. I am trying to install Ubuntu in Orbbec Persee+ on my Windows 10 computer by referring to the attached file “Persee Update ROM Guide.docx” found at “Universal Download Th…

---

## [Interactive projection](https://3dclub.orbbec3d.com/t/interactive-projection/3480)

<div class="topic-metadata">

**Author:** [@tulgadamba](https://3dclub.orbbec3d.com/u/tulgadamba)\
**Replies:** 1\
**Last updated:** [June 2, 2022, 3:42pm UTC](https://3dclub.orbbec3d.com/t/interactive-projection/3480 "2022-06-02T15:42:43Z")

</div>

Hi all, I am new and not much experienced but i need to make interactive projection. I have projector and desktop pc. Should I get Astra Pro for sensor only? Does sensor comes with any app or software to complete solu…

---

## [Can't access stream using Astra SDK Android](https://3dclub.orbbec3d.com/t/cant-access-stream-using-astra-sdk-android/3276)

<div class="topic-metadata">

**Author:** [@WiktorPayEye](https://3dclub.orbbec3d.com/u/WiktorPayEye)\
**Replies:** 2\
**Last updated:** [April 6, 2022, 4:13pm UTC](https://3dclub.orbbec3d.com/t/cant-access-stream-using-astra-sdk-android/3276 "2022-04-06T16:13:12Z")

</div>

I am trying to access the color stream (actually any stream) from Orbbec Astra Embedded S using Astra SDK for Android. I am following the User Guide version 2.1.3 available on Orbec’s website. I call all of the methods e…

---

## [Orbbec Astra on touchdesigner](https://3dclub.orbbec3d.com/t/orbbec-astra-on-touchdesigner/3438)

<div class="topic-metadata">

**Author:** [@strifywifey](https://3dclub.orbbec3d.com/u/strifywifey)\
**Replies:** 0\
**Last updated:** [March 15, 2022, 2:07pm UTC](https://3dclub.orbbec3d.com/t/orbbec-astra-on-touchdesigner/3438 "2022-03-15T14:07:27Z")

</div>

Hi, I’m fairly new to this space and could really use some help in understanding what specific sdks and scripts do I install to use the Astra in touchdesigner. I have found no specific blog or information for my specific…

---

## [Use multiple Astra cameras](https://3dclub.orbbec3d.com/t/use-multiple-astra-cameras/3414)

<div class="topic-metadata">

**Author:** [@Fazou](https://3dclub.orbbec3d.com/u/Fazou)\
**Replies:** 1\
**Last updated:** [February 21, 2022, 8:17am UTC](https://3dclub.orbbec3d.com/t/use-multiple-astra-cameras/3414 "2022-02-21T08:17:11Z")

</div>

Hello, I’m looking to use multiple Astra cameras to detect movement of people and use this detection to have a interactive area on a wall where I have multiple projectors. I use unity and C# to work, but I haven’t found…

[Next page](https://3dclub.orbbec3d.com/c/developer-resources/getting-started/5.md?page=1)
