# Basic

**URL:** https://3dclub.orbbec3d.com/c/technical-support-q-a/basic/6.md

[Latest](https://3dclub.orbbec3d.com/latest.md) · [Categories](https://3dclub.orbbec3d.com/categories.md) · [Tags](https://3dclub.orbbec3d.com/tags.md)

---

## [About the Basic category](https://3dclub.orbbec3d.com/t/about-the-basic-category/22)

<div class="topic-metadata">

**Author:** [@james\_ashley](https://3dclub.orbbec3d.com/u/james_ashley)\
**Replies:** 0

</div>

There are no dumb questions. That’s why this category is here. You don’t have to start your question with “I’m just getting started so …” We all started somewhere. Just ask away.

---

## [Gemini 335 + Raspberry Pi 4 for a wearable navigation aid, will this work?](https://3dclub.orbbec3d.com/t/gemini-335-raspberry-pi-4-for-a-wearable-navigation-aid-will-this-work/4751)

<div class="topic-metadata">

**Author:** [@Mantaj](https://3dclub.orbbec3d.com/u/Mantaj)\
**Replies:** 0\
**Last updated:** [October 15, 2026, 3:30am UTC](https://3dclub.orbbec3d.com/t/gemini-335-raspberry-pi-4-for-a-wearable-navigation-aid-will-this-work/4751 "2026-10-15T03:30:25Z")

</div>

Hi everyone, We’re a team of four electrical engineering students at BCIT working on our capstone project. It’s a wearable navigation aid for people who are blind or have low vision, and we’re thinking about using a Gem…

---

## [Gemini 335i not connecting through USB?](https://3dclub.orbbec3d.com/t/gemini-335i-not-connecting-through-usb/4710)

<div class="topic-metadata">

**Author:** [@jonathane3c](https://3dclub.orbbec3d.com/u/jonathane3c)\
**Replies:** 1\
**Last updated:** [August 21, 2026, 4:53pm UTC](https://3dclub.orbbec3d.com/t/gemini-335i-not-connecting-through-usb/4710 "2026-08-21T16:53:14Z")

</div>

Hi! I have a Orbbec 335i that has worked flawless for a couple of months. It worked yesterday in the exact configuration it had today, but when I started it up it threw USB errors. I am running it on W11 and get this as…

---

## [How does the Gemini 335 IR camera read QR codes in low light?](https://3dclub.orbbec3d.com/t/how-does-the-gemini-335-ir-camera-read-qr-codes-in-low-light/4639)

<div class="topic-metadata">

**Author:** [@datvv](https://3dclub.orbbec3d.com/u/datvv)\
**Replies:** 1\
**Last updated:** [April 28, 2026, 3:39pm UTC](https://3dclub.orbbec3d.com/t/how-does-the-gemini-335-ir-camera-read-qr-codes-in-low-light/4639 "2026-04-28T15:39:54Z")

</div>

Hello everyone, I’m using the Gemini 335 IR camera (Intel RealSense) and encountering some difficulties in low-light conditions: Recognition capability: In dark or extremely low-light environments, is the IR sensor of t…

---

## [Camera recommendation for underwater stereo depth measurement](https://3dclub.orbbec3d.com/t/camera-recommendation-for-underwater-stereo-depth-measurement/4626)

<div class="topic-metadata">

**Author:** [@pau](https://3dclub.orbbec3d.com/u/pau)\
**Replies:** 0\
**Last updated:** [April 13, 2026, 1:52pm UTC](https://3dclub.orbbec3d.com/t/camera-recommendation-for-underwater-stereo-depth-measurement/4626 "2026-04-13T13:52:45Z")

</div>

Hello, I am building an underwater fish measurement system using a waterproof housing with external visible light LEDs (IR is absorbed by water, so active IR stereo will not work). I need a camera with: Passive stere…

---

## [I would like to know if you know how to use it as Azure Kinect with femto bolt in TouchDesigner.](https://3dclub.orbbec3d.com/t/i-would-like-to-know-if-you-know-how-to-use-it-as-azure-kinect-with-femto-bolt-in-touchdesigner/3908)

<div class="topic-metadata">

**Author:** [@runrun19](https://3dclub.orbbec3d.com/u/runrun19)\
**Replies:** 8\
**Last updated:** [March 6, 2026, 8:39am UTC](https://3dclub.orbbec3d.com/t/i-would-like-to-know-if-you-know-how-to-use-it-as-azure-kinect-with-femto-bolt-in-touchdesigner/3908 "2026-03-06T08:39:02Z")

</div>

I would like to know if you know how to use it as Azure Kinect with femto bolt in TouchDesigner.

---

## [Orbbec SDK Gemini 2 on Jetson Orin Nano (aarch64) on Ubuntu 22.04](https://3dclub.orbbec3d.com/t/orbbec-sdk-gemini-2-on-jetson-orin-nano-aarch64-on-ubuntu-22-04/4575)

<div class="topic-metadata">

**Author:** [@acayci](https://3dclub.orbbec3d.com/u/acayci)\
**Replies:** 0\
**Last updated:** [January 15, 2026, 5:59pm UTC](https://3dclub.orbbec3d.com/t/orbbec-sdk-gemini-2-on-jetson-orin-nano-aarch64-on-ubuntu-22-04/4575 "2026-01-15T17:59:28Z")

</div>

Hello, I have Gemini 2 3D camera. I am using Jetson Orin Nano. I want to install the SDK for that version of the camera. jetson@ubuntu:~$ uname -a Linux ubuntu 5.15.148-tegra #1 SMP PREEMPT Thu Sep 18 15:08:33 PDT 2…

---

## [Astra Pro and body tracking SDK. How many max tracked bodies?](https://3dclub.orbbec3d.com/t/astra-pro-and-body-tracking-sdk-how-many-max-tracked-bodies/1154)

<div class="topic-metadata">

**Author:** [@ryanw](https://3dclub.orbbec3d.com/u/ryanw)\
**Replies:** 3\
**Last updated:** [November 3, 2025, 3:43pm UTC](https://3dclub.orbbec3d.com/t/astra-pro-and-body-tracking-sdk-how-many-max-tracked-bodies/1154 "2025-11-03T15:43:47Z")

</div>

I am looking for specs on the number ‘max’ tracked bodies available for the different Astra products. I am currently developing with an Astra Pro, but would need to know if the max is different for the other astra produ…

---

## [Is it possible to feed self caliberated camera intrinsic and extrinsic value to AlignFilter() function](https://3dclub.orbbec3d.com/t/is-it-possible-to-feed-self-caliberated-camera-intrinsic-and-extrinsic-value-to-alignfilter-function/4524)

<div class="topic-metadata">

**Author:** [@blanklavender](https://3dclub.orbbec3d.com/u/blanklavender)\
**Replies:** 0\
**Last updated:** [September 15, 2025, 8:43pm UTC](https://3dclub.orbbec3d.com/t/is-it-possible-to-feed-self-caliberated-camera-intrinsic-and-extrinsic-value-to-alignfilter-function/4524 "2025-09-15T20:43:42Z")

</div>

I am working on aligning my depth stream to color stream using my Femto bolt camera. For doing this, I noticed that there is an already existing function called AlignFilter() that handles this. I used this function to ge…

---

## [Femto Mega does not send videos](https://3dclub.orbbec3d.com/t/femto-mega-does-not-send-videos/4494)

<div class="topic-metadata">

**Author:** [@yuya.kobayashi](https://3dclub.orbbec3d.com/u/yuya.kobayashi)\
**Replies:** 3\
**Last updated:** [August 25, 2025, 5:59pm UTC](https://3dclub.orbbec3d.com/t/femto-mega-does-not-send-videos/4494 "2025-08-25T17:59:43Z")

</div>

Hello, I have been playing Femto Mega while modifying sample code in pyorbbecsdk, and the behavior was getting unstable and finally now no video is being sent from the stream, even with OrbbecViewer. Could you tell me h…

---

## [Front LED Blinking Orange when starting Pipeline of secondary camera](https://3dclub.orbbec3d.com/t/front-led-blinking-orange-when-starting-pipeline-of-secondary-camera/4449)

<div class="topic-metadata">

**Author:** [@timnogga](https://3dclub.orbbec3d.com/u/timnogga)\
**Replies:** 3\
**Last updated:** [June 26, 2025, 12:36pm UTC](https://3dclub.orbbec3d.com/t/front-led-blinking-orange-when-starting-pipeline-of-secondary-camera/4449 "2025-06-26T12:36:29Z")

</div>

Hi everyone, I’m trying to shoot 50 synchronised RGB frames with two Femto Mega cameras (one set to PRIMARY, the other to SECONDARY). As soon as I start the pipeline on the secondary unit its front LED begins blinking …

---

## [Possible to synchronize Orbbec Femto Bolt and Azure Kinect RGBD?](https://3dclub.orbbec3d.com/t/possible-to-synchronize-orbbec-femto-bolt-and-azure-kinect-rgbd/4421)

<div class="topic-metadata">

**Author:** [@hb620](https://3dclub.orbbec3d.com/u/hb620)\
**Replies:** 1\
**Last updated:** [May 2, 2025, 3:32pm UTC](https://3dclub.orbbec3d.com/t/possible-to-synchronize-orbbec-femto-bolt-and-azure-kinect-rgbd/4421 "2025-05-02T15:32:21Z")

</div>

Hello, I understand that the Orbbec Femto Bolt is a successor to the Azure Kinect RGB-D. My question is: can I synchronize these two devices?

---

## [Femto Bolt reports "could not find camera in windows device tree"](https://3dclub.orbbec3d.com/t/femto-bolt-reports-could-not-find-camera-in-windows-device-tree/3846)

<div class="topic-metadata">

**Author:** [@Tim](https://3dclub.orbbec3d.com/u/Tim)\
**Replies:** 2\
**Last updated:** [March 24, 2025, 3:14pm UTC](https://3dclub.orbbec3d.com/t/femto-bolt-reports-could-not-find-camera-in-windows-device-tree/3846 "2025-03-24T15:14:33Z")

</div>

I am using the Femto Bolt with a thunderbolt PCIe enclosure containing a USB 3.1 card so that I may expand the number of USB ports on my laptop and use several cameras at the same time. The enclosure is the Sonnet Echo …

---

## [Orbbec error codes and explanations](https://3dclub.orbbec3d.com/t/orbbec-error-codes-and-explanations/4402)

<div class="topic-metadata">

**Author:** [@ebayoi2cat](https://3dclub.orbbec3d.com/u/ebayoi2cat)\
**Replies:** 0\
**Last updated:** [March 13, 2025, 4:10pm UTC](https://3dclub.orbbec3d.com/t/orbbec-error-codes-and-explanations/4402 "2025-03-13T16:10:17Z")

</div>

Hello, Is there any place where the error codes are explained? I get the log: \[03/13 16:33:55.391512\]\[error\]\[24568\]\[RawPhaseStreamer.cpp:310\] Process frame failed! Error code:106 I would like to have more information…

---

## [Femto Bolt Power Supply Compatibility with Azure Kinect](https://3dclub.orbbec3d.com/t/femto-bolt-power-supply-compatibility-with-azure-kinect/4382)

<div class="topic-metadata">

**Author:** [@Antzy](https://3dclub.orbbec3d.com/u/Antzy)\
**Replies:** 2\
**Last updated:** [February 20, 2025, 8:11am UTC](https://3dclub.orbbec3d.com/t/femto-bolt-power-supply-compatibility-with-azure-kinect/4382 "2025-02-20T08:11:10Z")

</div>

Hi, I have an Azure Kinect permanently installed in a hard to access location. It has stopped working and we are planning to replace with Femto Bolt. Since the cables are already installed, will the power supply for Az…

---

## [Femto Mega Transformation from 2D color pixel to 2D depth pixel](https://3dclub.orbbec3d.com/t/femto-mega-transformation-from-2d-color-pixel-to-2d-depth-pixel/4376)

<div class="topic-metadata">

**Author:** [@triplecmike](https://3dclub.orbbec3d.com/u/triplecmike)\
**Replies:** 3\
**Last updated:** [February 17, 2025, 10:05pm UTC](https://3dclub.orbbec3d.com/t/femto-mega-transformation-from-2d-color-pixel-to-2d-depth-pixel/4376 "2025-02-17T22:05:19Z")

</div>

Hi All, Is there a way to perform coordinate transformation from 2D color pixel to 2D depth pixel, similar to how this function work “ob::CoordinateTransformHelper::transformation2dto2d(sourcePixel, depthValue, depthIn…

---

## [Ground-zero for Astra 2 depth camera](https://3dclub.orbbec3d.com/t/ground-zero-for-astra-2-depth-camera/4367)

<div class="topic-metadata">

**Author:** [@h-erx](https://3dclub.orbbec3d.com/u/h-erx)\
**Replies:** 0\
**Last updated:** [January 29, 2025, 8:55am UTC](https://3dclub.orbbec3d.com/t/ground-zero-for-astra-2-depth-camera/4367 "2025-01-29T08:55:41Z")

</div>

I have an Astra 2 I’m using to create depth maps, and I couldn’t find the zero depth point of the camera online, does anyone have this information? I’m assuming it’s the front of the IR sensor, but how far is that exact…

---

## [enableFrameSync() results in nullptr return](https://3dclub.orbbec3d.com/t/enableframesync-results-in-nullptr-return/4360)

<div class="topic-metadata">

**Author:** [@s3213403](https://3dclub.orbbec3d.com/u/s3213403)\
**Replies:** 0\
**Last updated:** [January 23, 2025, 9:48am UTC](https://3dclub.orbbec3d.com/t/enableframesync-results-in-nullptr-return/4360 "2025-01-23T09:48:01Z")

</div>

I’m using the Orbbec SDK (v1.10.18) with a Femto Bolt device (firmware 1.0.9) and tried running the Sample-SyncAlignViewer example. As soon as I press F to enable frame synchronization, I see in the console that the inco…

---

## [Astra 2 mounting screws](https://3dclub.orbbec3d.com/t/astra-2-mounting-screws/4355)

<div class="topic-metadata">

**Author:** [@h-erx](https://3dclub.orbbec3d.com/u/h-erx)\
**Replies:** 2\
**Last updated:** [January 20, 2025, 8:41am UTC](https://3dclub.orbbec3d.com/t/astra-2-mounting-screws/4355 "2025-01-20T08:41:43Z")

</div>

Hello, I’ve recently bought an Astra 2 that I want to mount in a test bench I’m using. Unfortunately, its datasheet (https://d1cd332k3pgc17.cloudfront.net/wp-content/uploads/2023/04/ORBBEC\_Datasheet\_Astra-2\_V1.1.pdf) se…

---

## [Can Femto Bolt operate under PTP (Precision Time Protocol)?](https://3dclub.orbbec3d.com/t/can-femto-bolt-operate-under-ptp-precision-time-protocol/4352)

<div class="topic-metadata">

**Author:** [@dcappelletticc](https://3dclub.orbbec3d.com/u/dcappelletticc)\
**Replies:** 0\
**Last updated:** [January 8, 2025, 9:53pm UTC](https://3dclub.orbbec3d.com/t/can-femto-bolt-operate-under-ptp-precision-time-protocol/4352 "2025-01-08T21:53:48Z")

</div>

Hello, we’re trying to set up a volumetric capture studio where we plan to acquire Femto Bolt cameras. My first question is: Can Femto Bolt operate under PTP (Precision Time Protocol)? Additionally, we’d like to synchr…

---

## [Astra 2 depth scaled by 1.2x](https://3dclub.orbbec3d.com/t/astra-2-depth-scaled-by-1-2x/4327)

<div class="topic-metadata">

**Author:** [@CheddarChopper](https://3dclub.orbbec3d.com/u/CheddarChopper)\
**Replies:** 0\
**Last updated:** [November 18, 2024, 9:54pm UTC](https://3dclub.orbbec3d.com/t/astra-2-depth-scaled-by-1-2x/4327 "2024-11-18T21:54:42Z")

</div>

Hello, I connected an Astra2 camera fresh out of the package. I started the astra2.launch.py from orbbec\_camera package from orbbecSDK\_ROS2 repository after proper setup. The distances in the depth pointcloud are scale…

---

## [Device and Pipeline for USB and Ethernet](https://3dclub.orbbec3d.com/t/device-and-pipeline-for-usb-and-ethernet/4308)

<div class="topic-metadata">

**Author:** [@dko](https://3dclub.orbbec3d.com/u/dko)\
**Replies:** 1\
**Last updated:** [November 13, 2024, 9:13pm UTC](https://3dclub.orbbec3d.com/t/device-and-pipeline-for-usb-and-ethernet/4308 "2024-11-13T21:13:02Z")

</div>

Hello, I’m developing for the Femto Mega camera using Orbbec SDK 1.10.8, and I’m running into an issue. I am enumerating USB + ethernet connected devices through enableNetDeviceEnumeration(), and I want to switch betwee…

---

## [Cómo puedo instalar orbbec Astra s en Windows 10](https://3dclub.orbbec3d.com/t/como-puedo-instalar-orbbec-astra-s-en-windows-10/4305)

<div class="topic-metadata">

**Author:** [@rafagonbri](https://3dclub.orbbec3d.com/u/rafagonbri)\
**Replies:** 0\
**Last updated:** [November 4, 2024, 6:52pm UTC](https://3dclub.orbbec3d.com/t/como-puedo-instalar-orbbec-astra-s-en-windows-10/4305 "2024-11-04T18:52:35Z")

</div>

I would like you to help me install an Astra s camera on Windows 10 since I am not familiar with these compiler systems. I thought that only an .exe file was executed and that was it. I don’t know how to view it to obtai…

---

## [Possibility of creating a simple game using the capabilities of the Orbbec Astra Pro Plus lidar without having a lidar](https://3dclub.orbbec3d.com/t/possibility-of-creating-a-simple-game-using-the-capabilities-of-the-orbbec-astra-pro-plus-lidar-without-having-a-lidar/4303)

<div class="topic-metadata">

**Author:** [@natiknn](https://3dclub.orbbec3d.com/u/natiknn)\
**Replies:** 0\
**Last updated:** [November 2, 2024, 10:07am UTC](https://3dclub.orbbec3d.com/t/possibility-of-creating-a-simple-game-using-the-capabilities-of-the-orbbec-astra-pro-plus-lidar-without-having-a-lidar/4303 "2024-11-02T10:07:00Z")

</div>

Hello everyone! I do not have the Orbbec Astra Pro Plus lidar, but I need to develop a game on its basis using Orbbec SDK и Orbbec Unity SDK Wrapper. Is it still possible? Is there any emulators to test it?

---

## [USB errors w/ Orbbec](https://3dclub.orbbec3d.com/t/usb-errors-w-orbbec/4159)

<div class="topic-metadata">

**Author:** [@atharvp04](https://3dclub.orbbec3d.com/u/atharvp04)\
**Replies:** 15\
**Last updated:** [October 8, 2024, 6:27am UTC](https://3dclub.orbbec3d.com/t/usb-errors-w-orbbec/4159 "2024-10-08T06:27:08Z")

</div>

Not entirely sure if this is an Orbbec-specific issue but still want to check. I am trying to record with an Orbbec Femto Bolt camera, but when I try to actually use the camera, it doesn’t do anything. When I ran sudo dm…

---

## [Recording from multiple cameras](https://3dclub.orbbec3d.com/t/recording-from-multiple-cameras/4251)

<div class="topic-metadata">

**Author:** [@withey89](https://3dclub.orbbec3d.com/u/withey89)\
**Replies:** 2\
**Last updated:** [September 18, 2024, 11:06am UTC](https://3dclub.orbbec3d.com/t/recording-from-multiple-cameras/4251 "2024-09-18T11:06:28Z")

</div>

Is there a way of recording a single .bag file with multiple cameras in the python wrapper? I have an implementation written for saving individual images but would like to process the .bag rather than those.

---

## [How to set 0.1 mm precision for Depth values using OrbbecSDK\_CSharp and Astra2](https://3dclub.orbbec3d.com/t/how-to-set-0-1-mm-precision-for-depth-values-using-orbbecsdk-csharp-and-astra2/4238)

<div class="topic-metadata">

**Author:** [@kocsisa](https://3dclub.orbbec3d.com/u/kocsisa)\
**Replies:** 2\
**Last updated:** [September 6, 2024, 7:50am UTC](https://3dclub.orbbec3d.com/t/how-to-set-0-1-mm-precision-for-depth-values-using-orbbecsdk-csharp-and-astra2/4238 "2024-09-06T07:50:56Z")

</div>

Hi, I prepared a C# code to get Aligned/synced depth and rgb images from an Astra2 camera. In the OrbbecViewer I see an option Under Depth Advanced Controls to set the Deph Unit to 0.1 mm. How to set this by using Orb…

---

## [How to to convert my depth images and color images to point cloud](https://3dclub.orbbec3d.com/t/how-to-to-convert-my-depth-images-and-color-images-to-point-cloud/4231)

<div class="topic-metadata">

**Author:** [@trent.black](https://3dclub.orbbec3d.com/u/trent.black)\
**Replies:** 0\
**Last updated:** [August 23, 2024, 11:31am UTC](https://3dclub.orbbec3d.com/t/how-to-to-convert-my-depth-images-and-color-images-to-point-cloud/4231 "2024-08-23T11:31:51Z")

</div>

Hardware: femto mega I I am currently saving png images in color at (1280 x 720) just the same way the example code in python shows how to do. then I am saving .raw depth images (1280x720) just like the example shows. …

---

## [Unable to get OrbbecViewer to load on OSX](https://3dclub.orbbec3d.com/t/unable-to-get-orbbecviewer-to-load-on-osx/4222)

<div class="topic-metadata">

**Author:** [@jneang](https://3dclub.orbbec3d.com/u/jneang)\
**Replies:** 2\
**Last updated:** [August 13, 2024, 6:25am UTC](https://3dclub.orbbec3d.com/t/unable-to-get-orbbecviewer-to-load-on-osx/4222 "2024-08-13T06:25:48Z")

</div>

Running Macbook Air M3, v1.10.12 SDK (Orbbec Viewer), i was able to get the libraries loaded, but I run into this error and it just crashes… chi@MacBook-Air ~ % /Users/chi/Downloads/OrbbecViewer\_v1.10.12\_202408091655\_ma…

---

## [Can not connect Femto Mega I to example c++ progarms](https://3dclub.orbbec3d.com/t/can-not-connect-femto-mega-i-to-example-c-progarms/4216)

<div class="topic-metadata">

**Author:** [@trent.black](https://3dclub.orbbec3d.com/u/trent.black)\
**Replies:** 4\
**Last updated:** [August 6, 2024, 2:20pm UTC](https://3dclub.orbbec3d.com/t/can-not-connect-femto-mega-i-to-example-c-progarms/4216 "2024-08-06T14:20:51Z")

</div>

I get this when trying to run the Femto Mega I with the c++ example code. the camera has the default Ip address 192.168.0.10. The network card it is connected to has the same subnet (192.168.0.11 /24 ). What steps am…

[Next page](https://3dclub.orbbec3d.com/c/technical-support-q-a/basic/6.md?page=1)
